C6owners :: Forums :: C6 Support :: Super Sticky

Everything I have found about the RT4/5 and USB (and phones and Bluetooth)

Home   Forum Rules    Forum Help  Conversion Tools
Please Register to enjoy additional Member Benefits
Top Thanked Forum Posts: Today | Week | Month | Year | All time | Most Thanks Given: To member | By user
Author Post
Tue Jul 24 2012, 07:07am
Joined: Oct 08 2009
Member No: #3
Location: North Yorkshire
As michaelb says you undo the two Torx screws (T10 from memory?) which are in the small holes at either side of the head unit facia panel. You will need a long torx bit or screwdriver type as the screw heads are too recessed for a normal socket set type bit. The head unit then simply pulls out. The 'extractors' are probably for RT4 when used in other Citroen/Peugeot models.
Tue Jan 28 2014, 10:35am
Joined: Nov 09 2011
Member No: #710
Location: Watford
Necro time ...

I got a cable fitted to my RT4 unit today (well colelcted the car today). If I put a pen drive in I get a Recognising CD message (as you do with a firmware/speedcamera/map update), but then nothing. The drive is set up as follows
Volume in drive D has no label.

Directory of D:\

19/03/2009 10:39 55,731 BUILTINS.OUT
19/03/2009 10:40 77 BUILTINS.OUT.inf
28/01/2012 12:03 111 POI_VER.POI
27/01/2014 13:50 <DIR> UPG
27/01/2014 13:49 <DIR> CMD

Volume in drive D has no label.

Directory of D:\CMD

27/01/2014 13:49 <DIR> .
27/01/2014 13:49 <DIR> ..
13/11/2009 11:12 7,566 CONFIGFLAG.CMD

and nothing in the UPG folder. Am I missing some thing ? I'm running firmware 8.31 so could this be an issue as well (i.e. too high).

Cheers for any help
Tue Jan 28 2014, 12:11pm
Joined: Nov 09 2011
Member No: #710
Location: Watford
Now sorted - was missing the POI_UPGRADE.CMD file from the UPG folder - if I'd just uncompressed the Mirascripts zip on to the USB drive it would have been fine
Go to page   <<       

Jump:     Back to top

User Colour Key:
Head Administrator, Administrator, C6 owner, Technical Expert, C6 Premier Discount Club