Login   
C6owners :: Forums :: C6 Market Place :: C6 Parts Market
<< Previous thread | Next thread >>

Looking for LH Side doors in Black Pearl for 2010 2.2 diesel
Home   Forum Rules    Forum Help  Conversion Tools
   
Please Register to enjoy additional Member Benefits
Author Post
chrisisbd   
Fri Jun 20 2025, 10:48am
Joined: Jul 23 2015
Member No: #2258
Location: Woodbridge, Suffolk
 The local body repair shop has confirmed that it will be much cheaper to replace the doors than to mend the existing ones even though the dent doesn't look that bad.

If anyone here has any I'm interested but more to the point does anyone have any good or bad experience with eBay sellers of such things? In particuar is the seller Autominute in Lithuania OK as they have several possible doors.

Also am I right in thinking that any C6 door will fit OK, I don't have to worry about engine or year?
ReaperCushions   
Fri Jun 20 2025, 11:47am
Joined: Mar 14 2025
Member No: #5805
Location: Scottish Highlands
 Try 'Number 1 Auto Salvage' in Bolton upon Dearne, South Yorkshire.

According to their website they're breaking three C6s and are showing all 4 doors available for at least one of them (in Iron Grey) for between £114 and £133.

Have a look here: - Click Here -

I can't vouch for them as I've never used them but came across their website when searching for a different part.

They used to have an eBay presence too though I can't find anything listed at the moment.

Hope this helps.
C6Dave   
Fri Jun 20 2025, 02:55pm


Joined: Oct 01 2009
Member No: #1
Location: Northumberland
chrisisbd wrote ...

....... In particuar is the seller Autominute in Lithuania OK as they have several possible doors.

Did you see the programme on TV last night about cars stolen in the UK then broken for part ending up in the Middle East and also that country?

Anyway, if you can get a UK one it might survive better than coming in via customs from the EU. Get a quote for UK delivery from 'Proovia' - Click Here - who will collect/deliver insured.
Website
MGmike   
Fri Jun 20 2025, 11:49pm

Joined: May 21 2017
Member No: #3151
Location: South Queensferry
 Replacing with a door of the same colour code is always the best option but.... finding one is the issue.

Replacing with another colour and painting is the least favourite option as the cost can escalate quickly.

If the dent(s) haven't caused paint damage, I would be looking for a paintless repair specialist. The costs will be less but close to the repaint cost and a lot less hassle.

If you need a door to have painted, I can probably supply but delivery cost will be substantial.
C6Dave   
Sat Jun 21 2025, 07:49am


Joined: Oct 01 2009
Member No: #1
Location: Northumberland
MGmike wrote ...

If you need a door to have painted, I can probably supply, but delivery cost will be substantial.

Between £60 & £75 for a car door with Proovia Mike depending on service chosen
Website
chrisisbd   
Thu Jun 26 2025, 11:06am
Joined: Jul 23 2015
Member No: #2258
Location: Woodbridge, Suffolk
 Thanks all for the various bits of advice and information. I'm off to France next week and there's a breaker near Lille (which I will be driving past) who has several C6s so I'm going to look there.

Am I right in thinking that a C6 door is the same for all models and dates (other than interior trim etc. of course)?
C6Dave   
Thu Jun 26 2025, 12:21pm


Joined: Oct 01 2009
Member No: #1
Location: Northumberland
chrisisbd wrote ...

Am I right in thinking that a C6 door is the same for all models and dates (other than interior trim etc. of course)?

They should be all the same (apart from trim) so good luck on the hunt
Website
MGmike   
Thu Jun 26 2025, 03:28pm

Joined: May 21 2017
Member No: #3151
Location: South Queensferry
chrisisbd wrote ...

Thanks all for the various bits of advice and information. I'm off to France next week and there's a breaker near Lille (which I will be driving past) who has several C6s so I'm going to look there.

Am I right in thinking that a C6 door is the same for all models and dates (other than interior trim etc. of course)?


The metalwork and locks will be the same but I believe the wiring harness may be model specific. This can be swapped with the original if any differences are found, just watch out for sharp metal edges in there
 

Jump:     Back to top