Login   
C6owners :: Forums :: C6 Support :: Super Sticky

Sidelights to LED's

Home   Forum Rules    Forum Help  Conversion Tools
   
Please Register to enjoy additional Member Benefits
Top Thanked Forum Posts: Today | Week | Month | Year | All time | Most Thanks Given: To member | By user
Author Post
Trainman   
Thu Apr 30 2015, 10:32am

Joined: Apr 12 2010
Member No: #86
Location: Penwortham
Open the bonnet and you will see a triangular panel with 3 round clips, the centre of the lifts up (but doesn't come out) lift the centre of the clips to release the lock and then remove all three clips



once you done this, you remove the rubber seal and move the triangular panel out of the way, once you done this you can see a circular rubber bung



This should just pull off but may need a little help to break the seal.

with that out of the way you can see a white lever, this needs twisting towards the back of the car slighty to unlock it from the mount.



you can then extract the bulb and change it for the LED



Refitting is just the reverse.

the bulbs I used were these: - Click Here -

PLESASE NOTE: They will not fit the number plate holders as the bulbs are to long, I'm currently searching for some to do that
magicands   
Thu Apr 30 2015, 04:57pm
Joined: Sep 13 2012
Member No: #1021
Location: Coventry, Warwickshire
Great photos, thanks for the guide as well.
I used these number plate LED's and they work just great.

- Click Here -
Website
Leeant   
Thu Dec 10 2015, 05:35pm
Joined: Nov 11 2015
Member No: #2397
Location: Oldham
I have just done this.
Took me 20 minutes maximum and that was in the dark. Excellent guide.
Norman   
Fri Dec 11 2015, 11:09am
Joined: Feb 06 2011
Member No: #364
Location: Huddersfield and Torremolinos Spain
I Used the same number plate lights on mine they are very bright indeed
Chris Burmajster   
Thu Dec 31 2015, 03:55pm
Joined: Apr 03 2010
Member No: #81
Location: South East
Sorry to be the one here, but can I state that I can't find the "rubber seal and move the trangle part out of the way". Is this the rubber multi plug shown in the second picture?
Trainman   
Thu Dec 31 2015, 04:00pm

Joined: Apr 12 2010
Member No: #86
Location: Penwortham
No Chris, picture 1, the rubber seal around the engine bay.
Chris Burmajster   
Thu Dec 31 2015, 05:25pm
Joined: Apr 03 2010
Member No: #81
Location: South East
Thank you!
 

Jump:     Back to top

User Colour Key:
Head Administrator, Administrator, C6 owner, Technical Expert, C6 Premier Discount Club